Climatic Test Chamber Corrosion Test Machine Environmental Test Chamber Test Equipment

• Customization: Available
• After-sales Service: 1year
• Power Supply: 1year
• Model NO.: MRT-YWX
• Certification: CE, ISO
• Warranty: 1 Year
• Salt Spray Test: Nss Aass
• Laboratory Temperature: 35ºC±1ºC. (The Set Value Should N
• Pressure Air Tank: 47ºC
• Saline Temperature: Preheat at Laboratory Temperature
• Temperature Uniformity: ≤±2ºC
• Temperature Fluctuation: ≤±1ºC
• Proving Time: 0-999 Hours Adjustable
• Amount of Precipitation: 1-2ml/80cm2/H
• Source: 220V 50Hz
• Transport Package: Wooden Packaging
• Specification: 1600*900*600
• Trademark: marit
• Origin: China
• Production Capacity: 50000pieces/Year
• Package Size: 1600.00cm * 900.00cm * 600.00cm
• Package Gross Weight: 120.000kg

Product Description

Fully automatic salt spray test chamber

A fully automatic salt spray test chamber is a device used to simulate a salt spray environment for corrosion testing. It generates salt mist by mixing heated water vapor with a salt solution, mimicking the destructive effects of marine climates on products. This process evaluates the reliability of samples in terms of their resistance to corrosion. Widely applied in material science, automotive manufacturing, electronics, and hardware industries, it assesses the corrosion resistance of materials and products in a salt spray environment. The demand for this equipment grows with the development of manufacturing.

Specification

front elevation

left elevation

right elevation

Technical Specifications

(Custom configurations available upon request.)

Model	MRT-YWX-60C	MRT-YWX-90C		MRT-YWX-110C	MRT-YWX-120C	MRT-YWX-130C	MRT-YWX-160C	MRT-YWX-200C
Inner  size (D*W*H) mm	600*450*400	900*600*500		1100*750*500	1200*800*500	1300*800*600	1600*900*600	2000*1000*600
External size (D*W*H) mm	1100*750*930	1500*900*1150		1700*1050*1150	1800*1100*1200	1900*1100*1300	2300*1300*1300	2700*1400*1500
uniphase	2KW ,50HZ.	2KW ,50HZ.		3.5KW ,50HZ.	3.5KW ,50HZ.	4KW ,50HZ.	5KW ,50HZ.	5KW ,50HZ.
source	220V	220V		220V	220V	220V	380V	380V
salt spray test	NSS , AASS.
Laboratory temperature	35℃±1℃. (The set value should not be lower than the ambient temperature at that time)
Pressure air tank	47℃±1℃.
Saline temperature	Preheat at laboratory temperature
temperature uniformity	≤±2℃
temperature fluctuation	≤±1℃
proving time	0-999 hours adjustable
amount of precipitation	1-2ml/80cm2/h
Spray method	NSS (neutral), AASS (acidic), CASS (copper accelerated) test, custom test Verification, programmable test, each test can be independently selected continuous spray or intermittent spray (according to the industry standard standard)
specimen holder	At an Angle of 15 to 30 degrees to the vertical (in the case of standard samples). Other irregular samples are built The pendulum remains tilted.
Outer box	5mm A grade bright PP board (imported from Taiwan)
tank cover	5mm wear-resistant transparent PVC observation window (imported from Taiwan)
sample holder	Grade A PP stent (imported from Taiwan)
time relay	OMRON
spray nozzle	Imports from Taiwan

 Product features

1. Low pressure starting solenoid valve: all solenoid valves start at low pressure, and the service life can reach 3 to 4 times that of ordinary solenoid valves.

2. Reliable quality touch screen: industrial grade touch screen, easy and sensitive touch, can be touched more than 400,000 times normally.

3. Closed circuit design: the whole closed circuit design makes it impossible for any fine salt spray particles to enter the main circuit box. Compared with the open circuit box of ordinary salt spray box, it has a strong anti-corrosion function. Meanwhile, the service life of the whole machine will be greatly extended.

4. Modular design: The whole machine adopts modular design, and each functional module is mostly plug-in wiring, which not only makes maintenance and overhaul very convenient, but also saves more cost.

5. Water Deficiency Automatic Protection: Automatic low water level protection. When a water deficiency occurs, if a tap water pipe is connected, the corresponding make-up water solenoid valve will automatically open; if the user has not connected a tap water pipe, this salt spray testing machine will enter an automatic standby state (pausing the current test to prevent dry burning of the machine). Once the user manually replenishes the water to the required level, the machine will resume operation.

6. One-click energy saving function: This salt spray test machine has the "one-click energy saving" function. During the test, if the user selects the "one-click energy saving" function, the machine will adjust the output in time according to the situation, and can minimize the waste of energy while ensuring the accuracy of the test, so as to truly achieve energy saving and environmental protection.

7. Setting the "Temperature Zone" to Improve Test Accuracy: This testing machine allows setting the test temperature zone. For example, when conducting a neutral salt spray test according to national standards, the laboratory temperature is set at 35°C, and the pressure chamber temperature is set at 47°C. If we set the "Temperature Zone" to 2℃ in user settings, then only when the laboratory temperature stabilizes between 33℃ and 37℃ will this test proceed

Company Profile

Wuxi Marit Technology Co., Ltd

Wuxi Marit Technology Co., Ltd. is a manufacturer engaged in environmental testing equipment. Our company has successively passed CE certification and IS09001 system certification. Products such as ovens, vacuum chambers, incubators, temperature and humidity test chambers, salt spray test chambers, constant temperature shaker, Resistance furnace  have been widely used in biopharmaceuticals, medical and health care, new energy vehicles, aerospace, scientific research institutions, etc. The products are sold at home and abroad, Europe, North America, Southeast Asia and other regions.

Why Choose Us?

Other Products

OEM/ODM capabilities
Competitive pricing & bulk discounts
Fast shipping & customs clearance support
Turnkey project solutions

dry oven
vacuum chamber
test chamber
incubator
constant temperature shaker

FAQ

Q: What’s the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.